Counting matching models…
A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to…
Replacement adjustable beard comb for some Philips HC and BT models. Recambio peine ajustable para barba compatible con algunos modelos Philips HC y BT.
This is an adapter to use cheap zip ties as trimmer blade. It was made for a "Güde Rasentrimmer 250/18 RT Set", but this kind of blades is also used from other trimmer brands like Bosch. If this thing works for you, pleas leave a commend…
ASA or PETG 0.15 Layer No Support, no Brim needed 100% infill
Two stands for the Braun MKG5544 electrical razor/trimmer/groomer and its accessories. The accessory stand is for the different heads of the device. The stands might also work for similar models made by Braun. The accessory stand is…
The Philips beardtrimmer BT9810/15 is a premium device but lacks one important feature - a stand! So when there is no thing I have to design and print it. With this design you get a stand for securely storing your BT9810/15. And you get a…
A cap to cover the bottom spool as the stock one is thin and can wear away after use. Clips on, it is much stiffer than the stock one. Printed in PETG, 0.2 layer height.
Couldn't find a decent mount for these so I made it myself. They are not perfect, but work great for me. Only caveat is being that these tools weren't designed with mounting in mind actually placing them on the mount is a little tricky.…
This edge banding trimmer is a lifetime tool that works pretty well. The tool make a perfect trim in seconds, is Very stable, especially on starting. You can reverse the blade when dulled. The trimmer allows up to 4mm thick banding. The…
Remix to fit my EGO string trimmer better. The original mount worked well for a trimmer that had a round shoulder, but this fits better with trimmers that have a rounded off square shoulder.
For handing your Milwaukee Quik-Lok string trimmer head. Print at .15-.2 mm and mount to wall.
Updated to change print orientation along the diagonal axis and extend diagonal brace into holder cup for greater strength. Can also be printed along top axis with some support. Also fits EGO Power+ Powerhead PH1400 Printed 0.4 nozzle, 4…
An aesthetically pleasant organiser that fits the (MG7715/65) Trimmer and all its accessories Designed to print super easy, just make sure the bottom is oriented to the print plate.
A simple line trimmer holder - mine was made for a stihl, but it would suit a bunch of others. I printed mine in a basic orange PLA and it has held for over 6 months with a straight shaft trimmer on it with no dramas.
Holders for OPT1845 2 pcs OPT1845 31mm Holder 1 pcs OPT1845 Holder for OHT1855R 1 pcs OHT1855R ensure enough perimetes. i used 5 for OHT1855R and OPT1845
Simple hanger for your brushcutter. Tested for echo srm-222es. Printed in PETG at 20% infill No supports needed if printed in default orientation Needs 4 screws for mounting
Holder for Ryobi trimmer Print instructions Print in PETG or PLA.
I like the idea of JMAW's Edge Banding Trimmer . Unfortunately it did not work that well for me. I wanted a model, where the blade can be fixed directly to the model using some screws and nuts, instead of having a clamp. Because in the…
18AUG22 Update - Uploaded .243 Win and 7.62x54R bushings 11NOV21 Update - I just uploaded the 6.5x55 Swedish and .22-250 Remington bushings. I've also uploaded a generic .dwg of how I design each of these bushings (6.5x55S is in this…
I bought recently a Einhell GE-CT 18 Li cordless grass trimmer. So here's blades for it. Might fit other trimmers too, Bosch blade looks identical. Red blade is original, blue one is printed. Print Settings Printer Brand: Prusa Printer:…
Milwaukee M18 Hedge Trimmer wall mount. I mounted them with #8 wood screws. Added a version that is mounted with a packout cleat remixed from:…
Needs printing with supports.
Sturdy wall mount for a DUX60 Makita trimmer. I modeled this around my specific machine and you may need to scale it up to make yours fit properly. Mount it with 3" to 3.5" #8 construction screws. Make sure you get the screws in a stud.…
I printed it in Bambu Lab basic PLA (one of the filaments that came with my P1S). Printed at 20% infill, 4 walls, and the base printed at 100% infill for resistance to flexing when loaded.
Spool cap for Worx string trimmers. Should be compatible with various Worx string trimmer models (WG150, WG151, WG152, WG153, WG154, WG155, WG156, WG157, WG160, WG163, WG165, WG175, WG180, etc.) Suggested to print in ABS or ASA Fusion 360…
Small but mighty wall hanger for the Dewalt pole saw/hedge trimmer combo. Print four to hold the pole saw, hedge trimmer, extension, and base kit. No supports are needed for this print. Petg preferred.
Overview This is a hand tool that uses a standard small boxcutter blade to trim a configurable length off the end of an empty shotgun hull (what many call a “shell”). If you want to trim the ends off of loaded cartridges, see…
Print with a very soft TPU, 100% infill and glue it with Cyanoacrylate. If you rather buy it, you can go to my Etsy shop (free shipping worldwide): https://www.etsy.com/fr/listing/1798060712/wahl-trimmer-power-button-replacement
This organizer will hold twelve Oster Andis or Wahl clipper blades or guards. When using PLA I got significant warping on the corners even with a skirt, so I printed using ColorFabb CF PETG, which meant I had to print it very slowly (12…
Printed in PETG. This has two holes for a flathead screws (8mm head).
Hang a Dewalt strimmer (by its D shaped handle) on a wall. Scuff plate can be affixed to wall at a height matching the flower guard. For best results: Print in PETG
The bit that hits the ground on a Ryobi one+18v line trimmer. Means I can bash/grind it against the ground without without worrying about replacing it best printed in abs/nylon for temperature/wear resistance Print Settings Printer Brand:…
Replacement trimmer guard for Wahl Peanut Parametric SW model and range (2mm, 4mm, 8mm and 16mm) of ready to print exported models. Print with PETG or something sturdy, I guess PLA will break easily. A bit tricky to print, requires good…
Had someone ask me to model this up for them. They bought a similar one off Ebay and didn't like how thin it was, so I bulked it up a little and increased the supports. Holds the Dewalt DCHT820B hedge trimmer but I'm sure it could be…
I created this to keep my DCST922 string trimmer up on the wall. It can be hung with the trimmer folded, facing either direction. The screw holes accept #9 pan head screws, or pretty much any similar size wood screw. I printed mine with…
I needed a #4 attachment. I used a parameter so the others were quick to add to the set. Recommend printing in PETG with supports. I used PCTG for the prototype because it was loaded and ready. Works great!
!!!This is a remix on a design found over at Thingivers!!! I'm quite curious and wanted to try and think outside the box with this idea. The original design maker, Doctriam made a great design that i have been using since last summer. The…
Replacement blade for the original Einhell Trimmer GC-CT 18/24 . If you are annoyed with your trimmer blades constantly breaking, consider using my string-trimmer head. It can use string-trimmer string or TPU plastic, both of which are…
Quick and easy print - use any layer height and infill. I printed in PETG, the replacement blades are still consumable so don't expect them to last long. Maybe a nylon or PC filament would be more durable, but PLA and PETG are pretty…
This remix extends the mounting surface by ~10mm to make room for Ego trimmers with an adjustable handle like the ST1510T. The older style trimmers still fit, but have bit of room to slide back and forth. I printed mine in Polymaker…
The membrane switch on my Wahl 9818L stainless steel beard trimmer fell to pieces. This is a simple replacement that's held in using the small countersunk screw that's hidden beneath the original power button. It's not a perfect fit, but…
DESCRIPTION Here a replacement comb for this Remington trimmer, because mine broke by falling several times. The replacement part is available for 2$ on Remingtonproduct.com , but they don't ship outside the US… Reference: Adjustable…
Projetei usando freecad, pente para corte de cabelo com altura de 3mm, para máquinas t9. 28/10/23 adicionado .step 28/10/23 adicionado .FCStd 31/10/23 adicionado versão com otimização de suporte e suavização de cantos .stl
Transforms your Einhell Single-Blade Trimmer into a string trimmer. Use at your own risk, the wire might get loose and fly off at high speeds, which can lead to injuries, always make sure to wear proper safety gear. Printing Choose an…
Wall mount for Ego Hedge Trimmer Category: Tool Holders & Boxes
This is a tool for trimming your vape coil legs. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Hand Tools
Wall Mount for Braun Beard Trimmer designed by 4iqvmk on Thingiverse. Print instructions Body (PLA z-marble) Printed on a Original PRUSA MK3SMMU2S. Infill: 20% Support: No Filament temperature: 210 Bed temperature: 60 Print settings :…
Travel case Philips - All-in-one trimmer Travel case designed specifically for the Philips Multigroom series, featuring an integrated locking system and optimized storage geometry. Compatibility Philips Multigroom Series 5000/7000 MG59XX,…
I have 2 battery powered Black+Decker string trimmers, one with the EZ Feed button and one without that function. This cap fits both perfectly, with the EZ Feed working on the one. I printed this on an Ender 5 Plus with a .8mm nozzle, it…
Stihl Trimmer Blades Replacement blades for Stihl 4 blade trimmer head. I offset the blade to print without supports. So far, I have only printed these in PLA but I'm sure they would be better in nylon or something more durable. The white…
I draw and tattoo my design and a friend asked if I do it with the machine I made. I thought to myself what a great idea and why not make a tattoo machine from some leftover electronics I have left in my house especially as I wanted one…
Replacement head for grass trimmer from Lidl (Parkside PRTA 20li A1). String is more cheaper and longer life than plastic blades. The head is tested a nice hold string. The thread is lefthand. No supports needed. I printed it from PETG…
This for trimming off the crimp from a 12 gauge shotgun shell. It uses common utility knife blades. Reverse them and use the other side when it gets dull. It should cut off the crimp about 4mm from the end. Use 3mm screws and nuts for…
Travel Case - Philips 7000 Trimmer Description A simple, strong and easy to assemble travel case for 7000 Philips trimer (I used MG7715/65 to model) that can be modified for your preferences of the attachments you use the most. This case…
Want to get the most out of your trimmer, this is a sollution. Knifes: Just found this amazing item on AliExpress. C
ALWAYS ENSURE SAFETY AND USE PROTECTIVE EQUIPMENT WHEN WORKING. Diameter of the cutting surface minus 3cm equals the length of one string. If you want a diameter of 18cm, subtract 3, cut two strings 15cm long and put them on as shown in…
Printed this in Prusament PCBlend so that it doesn't deform in my garden shed in summer. PETG should also be working, though. Design has some spikes in the back, to grip into the wood and prevent it from rotating.
Original part material PA6 (nylon) PLA is too fragile, but it can be used. PETG is a better material. PETG is more flexible. Original blade is sharp on both sides, self-designed with only one sharp side. Reason: better grip, better…
This mount allows the Ryobi 40v Expand-it trimmer to be hung from the wall with the trimmer head still attached. The only holder that I previously found for the Ryobi was for the power head only, but didn't have enough space to allow the…
This is a replacement blade for Ryobi 18V ONE+ Trimmer. A little longer, thicker and lasts longer than original blade. Original ones shatter when I accidentally touch a fence or a tree with a trimmer, 3D-printed ones just chip off a…
Wand-Halterung für Makita Rasentrimmer
A beard comb for a Philips beard trimmer model BT5515. The model replaces the original 0.4-10mm comb.
Some time ago I built a radio with a microcontroller and an FM-IC. I used an ordinary single-turn potentiometer to tune the frequency, but this did not work as intended. It was really difficult to tune in a specific frequency since the…
A replacement comb for the medium-length comb (7-24 mm) for the Philips HC7460/15 Hair Trimmer. The original part on my machine broke and is nearly impossible to glue, so I whipped together this printable replacement. Tested it, and it…
I was really tired of having to sort through the included bag for specific guards, trimmer sizes, etc, so I designed a set of Gridfinity bins to simplify my life. As someone who has to shave their head frequently, this has definitely made…
The V2 version of my upcycled tattoo machine is a bit lower than the last one for better weight distribution bit thicker around the tube as I had a few of them break before when I overtightened the screw I'm not gonna say it's better than…
This is an older version. Version 2 of this design is available here and has significant improvements. https://www.printables.com/model/1341290-dust-extractor-for-makita-18v-routertrimmer-drt50z Most router dust extractors are terrible at…
.STEP file available if you want a different gap
The Wahl Peanut trimmer comes with a few combs -- 1/4", 3/8", 1/2", but I nothing longer. These 3/4" and 1" combs give you more styling options. It slips snugly over the end of the trimmer, and pops off just as easily. Radiused comb tips…
Hatchbox PETG Pastel Green is a close color match, but let me know if you find something better!
This thing works great, I use it instead of trimmer line 90% of the time. A while back I had remixed https://www.thingiverse.com/thing:2438453 to add some (very thin) small flanges but never shared - these may break off but tend to help…
Remix model from m_a_CAR Versions for 6.5, 7, 7.5, 8, 9, 10mm guards. Printed with PLA due to layer adhesion issues with my PETG Filament. So I designed versions with easier layer adhesion by adding a 0.25mm layer. However the model…
It's not perfect copy of the original, but it seems to fit nicely and gets the job done. I was printing it with PLA and with supports, but I think supports are maybe not needed.
After suffering jam after jam on my Prusa I3 Mk3 I finally realized the problem was located between the heat brake and the PTFE tube. After referring to Prusa Research "How To Guide" I should have beveled the bottom end of the replacement…
Print using PLA or PETG. Add a M4 screw with butterfly nut. For the centering pin I used a 3mm old drill bit which I cut to size (about 10 mm) and inserted to the base by heating it first. You can view the Onshape design at…
This is a replacement comb attachment for Braun Hair Clippers. The model was specifically designed and tested for the product HC5010 . However, it should also be compatible with similar Braun models marked HC5090, HC5030, HC5310 and…
I tested it in PLA and TPU, both cut well, PLA just shatters very quickly. TPU lasts longer and is better. Maybe someone would like to test different materials and report back here ---------------------------------------------- Ich habe…
This is a replacement spool for Ryobi 18V & 40V auto feed trimmers. Specifically, I made this for a Ryobi 18V model P2008VNM. This is designed to replace the spool for 0.80" line. Can come in handy if you've lost a spool or just want to…
Trimmer head with changeable blades. I used melt inserts and M3x8mm bolts. Vary number of blades to see what works best.
Wallmount for Ryobi 18V ONE+ 25-30cm cordless grass trimmer. The Wallmount also features a holder for the sense trimmer blades, an extra spool and the sense trimmer adapter. Printing: Print Flat on the Build Plate and enable supports.…
🔧 Update – June 22, 2025 – Version 8: Added a rear tab (lug) to the blade to reinforce the area that tended to deform at high speed. Thanks to this improvement, the blade lasts much longer before coming loose. The right-side teeth have…
Print details: Material: PLA Printer: PRUSA i3 MK3S+ layer height: 0.20mm Supports: no Infill: 15% [English] The PTFE tube inserted in the hotend of the PRUSA i3 MK2.5S/MK3S/MK3S+ must be bevel-cut at both ends at 60 degrees. It is…
In this publishing I have included stls for 2 designs for the Carburetor adjustment tool. I used a Ryobi R09050 blower for testing and fabrication. I also included the blend file that I created the peices so you can modify in any way you…
Supports required on bottom of handles Use of this base requires removal of the black factory base plate Holes are sized for M4*12 countersunk head screws and/or the factory screws for the base plate
Box for trimmer 9000 series, with 15 additional sets,
Try to make it from a strong filament, 4+ perimeter and 50%+ infill! I made it from PETG @ 230C, part fan turned off to get better layer adhesion. The blade is flat, not simmetric for better bed adhesion.
I printed at .3 layer hight with .8 nozzle
This is printed on Prusa Mini from PETG - 0.2mm layer height and 20% infill.
I liked omerdagan's original design , but had a few small issues. The slots for one of the accessories and the 1mm guard didn't quite fit, and there was no place to store the swappable trimmer head when not in use. I widened the two slots…
No supports Hardware: M5 Bolts - 2x M5 Nuts - 2x Utility knife blade
Larger or extended baseplate for the popular Makita RT0700 trimmer/router or similar models with the same built and dimensions like Katsu. Additionally, a knob is available which can be mounted in three different positions and the…
This is the spool cover for a Toro string trimmer. My trimmer is a model 51486 (24 Volt lithium) but I have seen a lot with this same cover. If yours looks similar, give this a try and let me know in the comments if it works for you. It's…
Barnack Leica film trimmer. Two version of the baseplate let me know which one works best for you.
‿︵‿︵ʚɞ『 Français 』ʚɞ‿︵‿︵ The description in English is below Attention Cet objet est un accessoire qui se monte sur un outil qui peut s'avérer dangereux et provoquer de graves blessures s'il venait à casser ou mal utilisé. Si vous…
Print using supports, at least 20% infill in your material of choice. I used PLA, and it works great. The V2 version has a support that pushes the blade out away from the wall, so that the hedge trimmer has a more vertical resting…
Would recommend to print in PETG as PLA tends to creep and loose the clamping power. At least 2 walls. SUPPORT NEEDED! Post your print and recommend any changes that you see fit
Zdravím, vy modeloval jsem náhradní nůž do strunovky, primárně jsem to dělal na strunovku Parkside, ale myslí, , že by to mělo fungovat do jakékoliv strunovky tohohle typu. Nejlepší tisk je z FLEX materiálu, jelikož se neláme. Můžete…
Wahl cutting guides / beard trimmer organizer - Organiseur de guides de coupe pour tondeuse Wahl. Designed for Wahl Trimmer Elite Pro Organizer for Wahl 1.5, 3, 4,5, 6, 10, 13, 19 and 25 mm cutting guides “Un temps pour soi” is the name…
Designed for a rocks (lowball) glass. Just add salt and lime. Set is stackable for storage.
Remix is narrower to fit string trimmer. Use .3mf with bambu studio for text emboss
