Card Holders for Viticulture (Sleeved Mini Euro cards)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Can be used for any sleeved mini euro cards with the optional magnets.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 33
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These card holders can be use for any game but I design them specifically for Viticulture with sleeved cards. The magnets inside keeps the tray in line on the playing board without too much force.
Magnets used were 10mm x 1mm from amazon.
Printing instruction:
When you slice you model, make sure to add a pause to drop your magnets if you decide to use some.
I tried printing them with PLA at 0.1mm and 0.2mm layer heights and both of them give good results. The 0.1mm gives you a smoother ramp but takes more time.
For viticulture:
The 40mm model is for the yellow and blue visitor cards.
The 28mm model is for the green, purple and orange cards.