Card Holders for Viticulture (Sleeved Mini Euro cards)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Can be used for any sleeved mini euro cards with the optional magnets.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These card holders can be use for any game but I design them specifically for Viticulture with sleeved cards. The magnets inside keeps the tray in line on the playing board without too much force.
Magnets used were 10mm x 1mm from amazon.
Printing instruction:
When you slice you model, make sure to add a pause to drop your magnets if you decide to use some.
I tried printing them with PLA at 0.1mm and 0.2mm layer heights and both of them give good results. The 0.1mm gives you a smoother ramp but takes more time.
For viticulture:
The 40mm model is for the yellow and blue visitor cards.
The 28mm model is for the green, purple and orange cards.