Spraycan Nozzle Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds the spray nozzle and keeps it safe on the side of the can when not in use e.g. WD40, air dusters etc.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 59
- Makes
- 2
- Views
- 418
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my first ever design! I would get frustrated trying to use the flimsy piece of tape used to secure the nozzle for spraycans over and over; it gets dirty and loses its adhesiveness and eventually the nozzle can come loose and get lost in the workshop.
My design is very simple and secures the nozzle in a slot and then attaches to the can using a 8x3mm neodymium magnet. Simply use a drop of superglue to hold the magnet in the hole.
I tested this using two different cans, WD40 and an air duster, both were approximately 52mm in diameter