1 / 6
ClosetLock – Drop-In Stopper for Sliding Doors — image 1
1 / 6

ClosetLock – Drop-In Stopper for Sliding Doors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Drop-In Stopper for Sliding Doors

Rating
0 / 5
Likes
5
Downloads
32
Makes
0
Views
166
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Keep curious kids and nosy pets out of closets.

ClosetLock is a simple, effective way to secure sliding or bypass 2x closet door setup using a drop-in “key” that jams the doors shut against each other. Just drop it in to lock—and lift it out when you’re ready to open. No complicated mechanisms, no frustration. Just a clean, reliable stop that works.

Ideal For:

  • Childproofing closet doors
  • Keeping pets out of rooms or storage
  • Quick installs in apartments or rentals
  • Secure closets without permanent locks

Printing

Files Included:

  • Print-ready 3MF files
  • Editable STEP file for remixing
  • Recommended bambuslicer print profiles in PETG for best fit.  PLA should work fine too.
  • Make sure you have good bed adhesion or use a brim, as warping could cause issues.  I didn't need any glue, but you might if your bed adhesion isn't great.

Installing

You will need either:

  • A Command strip (perfect for renters or tool-free installs)
  • Or two #6 wood screws for a more permanent hold (requires slightly more door gap)

To keep things tidy, I recommend printing ClosetLock with a second mount that holds the locking key when not in use—ideal for nearby wall or door frame storage.

There are two sizes of key included here “Basic” and “Extra High” depending on how big the door gap is.

Note:  If the fit of the key is a little tight, you may wish to add a tiny bit of lubrication grease (mineral oil, vegetable oil, super-lube, whatever) to the fins of the key to help it slide nicely.

 

Tags