Minisforum MS A2 / MS 01 case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case designed for improved cooling
- Rating
- 4.8 / 5
- Likes
- 36
- Downloads
- 614
- Makes
- 7
- Views
- 5,047
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Minisforum MS-A2 and MS-01 one piece case, designed for extra cooling. Original case used for modeling with Fusion360, with some measurement tweaked for better fit and to allow some tolerances when 3D printed.
STEP file of the raw case without holes as well attached, ready for your remixes.
Print with a somewhat low warping and heat resistant filament, for example PETG-CF or PC-Blend.
Print with the back of the case on the bed !
Layer height: 0.2mm
Infill: 15% but can be increased for strength
Supports: "Snug" during the first ~5mm to support the perimeter overhang (See pictures)
Brim: Inner and outer
Perimeters: 2
