Scuba BCD Bladder Flange
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Scuba BCD Bladder Flange modeled off of DGX Flanges. In the pictures the red is ABS printed from my design, the black…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 62
- Makes
- 0
- Views
- 210
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Scuba BCD Bladder Flange modeled off of DGX Flanges. In the pictures the red is ABS printed from my design, the black one is a DGX commercial product. I made mine parts interchangeable with the industry standard. the last picture is assembled with an overpressure/dump valve. Due to the thread generator I used having a relatively small number of segments, the printed parts together have a slightly ratchety feel as you screw them together.
Disclaimer: These have not been tested in the water, and are meant for educational (not practical) use only. Use at own risk.
Update: Inner Flange channels squared off for better print quality. Flange installed with DGX gasket on one of my wings, holds pressure.
Update: V2 wide flange files added by request. I have not tested, use at own risk, etc.
Update: V3 STLs added, better tolerances working with factory hardware.
Print Settings
Printer:
GEEETECH MeCreator2
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
50%
Notes:
Recommend 100% infill if intending to test in water
Designed on TinkerCad. Threads used ISO metric thread generator with a 1.25 pitch. Update: V3 done in FreeCad
Category: Sport & Outdoors