Ender 3 V3 SE LCD support with Raspberry 3B enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support for the stock LCD panel, with a bottom compartment for a Raspberry PI 3B
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 106
- Makes
- 3
- Views
- 651
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is a new support for the stock LCD panel, with a bottom compartment for a Raspberry PI 3B. It's fixed to the printer using the original LCD mount screws.
I've been looking for an enclosure for RPI3+LCD but couldn't find any, so I made my own.
Thanks to @tomvdbroek, @jegi and @hugopnabais for their designs. I used part of their geometry to mix it up and create my enclosure.
Details
The top part orientation has been designed to minimize the amount of support needed, I strongly suggest you print it face down, like shown in the picture. Tolerances are tight, so depending on your printer's settings and filament you may need to press a bit to get the lid to close or the LCD to attach.
Don't mind the quality of my print, I'm using a crappy filament and I'm not that good at calibrating it.