Astrocam Shuttle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple little strap on carrier for the Estes Astrocam that sort of looks like a Star Trek Shuttle.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 60
- Makes
- 0
- Views
- 441
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
Simple print that makes it just a little easier to mount your Estes Astrocam on your airframe.
It's similar to the Estes Universal Mount - only this one looks like a Star Trek Shuttle!
The two different Shuttle bases offer different angles for the camera.
Note: Depending on your printer the Astrocam should fit very firmly into the base and the cap firmly onto the USB port. If not you may want to experiment with slight size scale reduction, it couldn't take much. In the end you're welcome to put tape across the gap between the cap and base.
I've included a STEP file if you want to tweak the design
This is the view from the Shuttle mount A
------------
Video from the B mount
You're welcome to print the cap as you wish but I found printing it on the point yields the best results for all the internal USB fitted elements of the cap.