1 / 2
Card Flip Holder + RF Shielding
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for credit card sized, er, cards! 2 versions, one with option at add RF shielding to reduce/prevent skimming
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I have a number of RFID cards for credit cards, debit cards and EV charge cards. I designed this holder to be able to hold cards. I have included 3 sizes in 2 versions
Printing Suggestions
- Print at 0.1mm layer height
- Hinge for all parts is a bit of 1.75mm filament. Inserted into the holes and cut a bit longer (1mm per side), then I secured using a soldering iron set at 200C with a conical tip, pushing into the centre of the filament.
Standard
- Print both parts for the number of cards you would like
RF Shielded
- Print the 3 main parts and the aluminium cut template. (Make sure the base of the bottom part has supports)
- Cut 2 pieces of aluminium foil using the template.
- Insert one on each side of the main body.
- Glue in the plug into the base to cover of the aluminium foil and complete the bottom.
The model is made in OnShape which is heavily parametric and is available here: https://cad.onshape.com/documents/091fdf4e4b0f8f8ec96707e1/w/50ec3aaa9e68a38939181080/e/888782272e9344a22c3d31f8?renderMode=0&uiState=686a452403879555bfc829ed