1 / 2
CR-30 3DPrintMill Logitech c270 Angled Camera Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to Allow Mounting of a c270 aligned with the bed angle.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Most people tend to mount their camera along the top support bracket. While this works, I found that it severely distorts depth and makes it difficult to see the print. I wanted a mount that positioned the camera to the side of the bed, so I could see it better, but this was confusing since the model was angled in the camera.
I designed this quick mount that tilts at a 45* angle to match the printer angle, and aligns the base of the camera with the print belt.