SKÅDIS VR Headset Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Store your VR headsets in style using IKEA SKÅDIS pegboard and this easy-to-print mount.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 47
- Makes
- 2
- Views
- 250
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution
This print should work with any headset with a face interface; it's verified to work with Quest 3, Valve Index, PSVR2, Vision Pro, and Bigscreen Beyond without triggering the presence sensor.
It prints in four parts: one Body (the main part), and three identical Pins that print on their side for optimal strength. Once printed, the Pins are permanently inserted into three corresponding slots on the Base. Make sure to insert these as shown (with the pin facing down as shown in the pictures here), since the pins are not removable and you will need to reprint all of the parts if you made a mistake.
The pins take considerable force to insert, and should loudly snap into place when fully inserted. They are not removable.