Prusa Core One Protect / Now with Mulicolor without MMU
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.30 – €2.81 net (excluding VAT)
For file: Prusa_Core_One_Protect_4_Multicolor_0.4n_0.2mm_PETG,PETG_COREONE_1h49m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.56 excluding VAT (range midpoint).
- Weight reported by the author
- 51 g
- Print time reported by the author
- 1.81 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Protection against scratches when inserting or removing the sheet.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 63
- Makes
- 5
- Views
- 651
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I noticed on my Core one that you can already see it on the inside wall where you often touch it with the sheet, which unfortunately cannot be avoided.
That's why I designed this protective cover, which can be easily attached with double-sided adhesive tape.
Edit:
Because someone asked for it, I created a multicolor version and a version that works without MMU.
The Gcode was edited manually and should work. However, I have not tested it myself.
The Gcode starts with the color of the cover and changes to the color of the font when printing the skirt.