Neptune 4 Max Beacon H Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attaches to OEM Neptune 4 Max extruder assembly in place of the proximity switch sensor, to mount the Beacon sensor.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 55
- Makes
- 0
- Views
- 482
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Neptune 4 Max OEM extruder assembly mount for the Beacon3D Rev H sensor. This should also work for Cartographer.
Beacon H will not fit without removing your x gantry aux fan, but you can use this model to create a gap so you can keep your fan:
https://www.printables.com/model/1244705-neptune-4-max-aux-fan-spacer-adapter
Print with auto (tree) supports, right side up. You will need M3 10mm (or smaller - I am using M3 8mm) heat set inserts to place in the mounting holes to attach the sensor.
I am using the following offset values for this mount:
x_offset: 0
y_offset: 22