Xenomorph orbiter HF face remixed for pogo pins
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Xenomorph orbiter HF face remixed for actual magnetic pogo pin connector.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 31
- Makes
- 1
- Views
- 275
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Disclaimer: these are test files made for me and community, if you wanna make this remix for yourself, write in the comments which hotend are you using so I can remix the front part of hotend holder for pogo pin connector or if you need different extruder front plate . (If it's not already done)
Added Phaetus Dragon holder by Alessandro front pogo RMX(link to original files and back piece)
Added Rapido 2 UHF front pogo RMX
Remix of new version of xenomorph orbiter HF front cover that uses pogo pin connector for LEDs and fans.
BOM:
5 pin right angle pogo pin connector with ears
https://a.aliexpress.com/_Ez0BxPM
4pc 1.5x5mm screws or you can use screws from old phone, or RC
Wiring, LEDs and fans are same as original from Nadir.
You will need to reprint front face, front part of hotend holder and front cover of orbiter extruder for better cable clearance. Then you can wire cables under the knomi and straight back to the ebb board.
Holes for screws are really tiny so enlarge them with small drill to preferred screw size. I have used really tiny ones from old phone.
Printing:
ASA/ABS same as Nadir recommends for xenomorph toolhead
For most uniform look of the front face, use 1 wall at bottom layer option
Infill: 30% gyroid
Perimeters: 4
Top Layers: 5
Bottom Layers: 5
Layer Height: 0.2mm
for more details, visit original article from Nadir.
-----------------------
Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)