Wall mount for MPK Mini Plus
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.86 – €1.06 net (excluding VAT)
For file: MPK-mini-plus-Mount_0.2mm_PLA_MK3S_1h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.96 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.01 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple wall mount for the MPK Mini Plus
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 15
- Makes
- 0
- Views
- 112
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
A simple, fast and easy to print wall mount for the MPK Mini Plus. The rods are stabilized with an extra texture so the grip and the durabilty are improved. The rods come into the two screw holes on the back of the keyboard where the small horizontal cutout is.
You need two M4 Countersunk Screws to screw it on the wall.
Print Settings:
- Infill: At least 10%
- Supports: None
- Raft: None
- Brim: None
Tipp: Add modifiers to the rods with Infill 100% for better durabilty. The modifiers should go through the mounting plate