1 / 1
Case for Raspberry Pi 5 using Pimoroni NVMe Base (version 5)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Raspberry Pi 5 case has room for an attached Pimoroni NVMe Base.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
This Raspberry Pi 5 case has room for an attached Pimoroni NVMe Base. Attach the NVMe Base to the under side of the Raspberry Pi5, then mount it to the “sled” using the long screws that came with the NVMe Base. Slide the “sled” into the “shell” and fix it in place with a short M3 screw. (The holes for the M3 screw is not pre-threaded, but the action of turning the screw should tap the holes.)
Both parts need to be printed with supports enabled.