Vizio D24 Leg - Parametic clearance height.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric legs for Vizio D series TVs, including the 24" D24.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 43
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution
These parametric legs should work for any Vizio D series television, but was specifically designed for and tested on a 24" Vizio D24 whose mounting cavity is slightly smaller than other D series TVs.
The f3d file is deigned to be parametric, if you adjust the “Clearance_Height” parameter, it will adjust the lengths and foot size to have a clearance between the bottom of the TV and the surface it is mounted on of the specified size. Some reference STEP files are included for sizes which should accommodate generation consoles and or soundbars. The feet size is increased to sizes which should provide adequate stability up to about 240mm of clearance height.
The holes which line up with the mounting holes on the TV are designed to work with standard m6 heatserts which work with standard VESA screws, in case you've misplaced the original legs/screws. With the f3d file, you can easily adjust the diameters to allow for any size you want.
I suggest 30% infill for anything above about 120mm in height, but otherwise I didn't find any special requirements - but all my test prints were with gyroid infill.