1 / 1
BlueOx Baseplate Tab Plug
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Plug for the tab mounting holes in a Blue Ox baseplate.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 63
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a plug for the tab mounting holes on a Blue Ox baseplate. It prevents debris from collecting in the hole when the tab is not in place, e.g., when your toad is not being towed.
Two are needed, but you knew that ;p
I printed these at 0.2mm structural in Overture TPU using the “Generic FLEX” profile in PrusaSlicer. I found the textured build plate worked best.
This model is sized for TPU; a PLA plug needs to be a little smaller as it doesn't flex.