1 / 2
Mitsubishi Pajero/Montero/Shogun brake fluid reservoir cap — image 1
1 / 2

Mitsubishi Pajero/Montero/Shogun brake fluid reservoir cap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a temporary replacement cap for the brake fluid reservoir on a Mitsubishi Pajero 4th generation (Montero/Shogun)

Rating
0 / 5
Likes
5
Downloads
87
Makes
0
Views
364
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

This is a temporary replacement cap for the brake fluid reservoir on a Mitsubishi Pajero 4th generation (Montero/Shogun).

I suspect this would work for other Mitsubishi cars.

I have made this out of ASA, however I believe that brake fluid (DOT3/4) would corrode ASA, PETG and PLA. Perhaps ABS might be better. This should be used as a temporary measure only. 

The original cap also has a rubber seal on the inside, this stops moisture getting in, as brake fluid is hygroscopic. This replacement cap does not therefore seal completely the reservoir, hence it's only a temporary measure.

 

Printed with 20% infill

0.2mm layer height

4 perimeters

Supports (standard) were used (they are easy to remove) to assist with printing the 3 tabs properly.

Tags