D1S Xenon lamp twist tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tool to twist on and off D1S Xenon lamps from headlamp units (automotive). Size is 43,5mm square.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
When changing Xenon lights in situ, it's usually tight and awkward to get a good grip to twist the lamp unit. This tool makes the task way easier. It is small enough to get into the back of the headlamp unit, and provides for a good transfer of force to twist the D1S lamp off or on.
For one-time use it's sufficient to print in PLA 0.2 layer height with basic settings (15-20% infill). If you want a more durable tool, select a different material (ABS/ASA/PETG), increase wall thickness and infill. Print with support.
Fits Osram D1S Xenon units as is. With Philips units, increase the scale by 1% for a snug fit. This can vary by printer, so test your own.