D1S Xenon lamp twist tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool to twist on and off D1S Xenon lamps from headlamp units (automotive). Size is 43,5mm square.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
When changing Xenon lights in situ, it's usually tight and awkward to get a good grip to twist the lamp unit. This tool makes the task way easier. It is small enough to get into the back of the headlamp unit, and provides for a good transfer of force to twist the D1S lamp off or on.
For one-time use it's sufficient to print in PLA 0.2 layer height with basic settings (15-20% infill). If you want a more durable tool, select a different material (ABS/ASA/PETG), increase wall thickness and infill. Print with support.
Fits Osram D1S Xenon units as is. With Philips units, increase the scale by 1% for a snug fit. This can vary by printer, so test your own.