Mouse Clutch Fidget Toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fidget toy that uses a one-way "mouse" clutch.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 50
- Makes
- 0
- Views
- 244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This is a fidget toy version of a one-way clutch. It's designed to be unenclosed so the clutch mechanism is visible.
Warning: this can be super annoying.
In addition to the printable parts, you'll need:
- a short length of 3mm rod for the main axle (about 60mm)
- 2x M3 set screws (length doesn't really matter, I used 3mm)
You might be able to get away without the set screws by press fitting the parts to the axle - it'll depend on your printer settings. If too loose, perhaps try using slicer hole compensation or scale it down a bit. Or use slightly larger axle rod (eg: 1/8" rod is just over 3mm).
The pawls and sync ring are print-in-place, so you'll need a well calibrated printed.
Reddit discussions here: