Dishrag holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small holder for your dish rag so it can dry and stay out of the way!
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 59
- Makes
- 1
- Views
- 551
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU General Public License v2.0
Small holder for your dish rag so it can dry and stay out of the way!
The lid screws on to the body and I would recommend trying different colors for the two parts. Body has small holes all around to get some ventilation and reduce the amount of water getting trapped inside.
It is attached using double sided tape to avoid having to drill into the tiles.
I printed mine at 0.20mm with 15% infill on my Prusa MK3S using white EasyPrint PLA.
IMPORTANT! Model has a 100mm Ø which is quite large so make sure to scale to an appropriate size, I used 60%.
No supports needed if you make sure to print both lid and body with the top and bottom facing the heat bed. Took approximately 2h.