Monitor shelf for HP 23xi
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A shelf for knickknacks and tools that fits on 14mm thick monitor, with an edge to stop sliding off.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I have too many small items that were just cluttering up the place and a wide open space above my monitors. I decided my first 3d model would be a simple shelf to fit my HP 23xi monitor (mostly because it was a regular thickness at the top). Hopefully it will be useful for other people.
This is a simple shelf with a 14mm gap that fits on top some monitors. Wide enough to fit a game controller top. I put an edge along the sides to prevent fall off the back. For some reason I also added a bumper on side of the shelf were the monitor sits. It might be on the thin side, but it is not meant to hold anything heavy.
I used mouse ear brims to help hold it during printing. For my monitor I made two shelfs 180mm long and one 175mm (the green ran out), just make sure it is not uniformed scaling.