Monitor shelf for HP 23xi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shelf for knickknacks and tools that fits on 14mm thick monitor, with an edge to stop sliding off.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 106
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I have too many small items that were just cluttering up the place and a wide open space above my monitors. I decided my first 3d model would be a simple shelf to fit my HP 23xi monitor (mostly because it was a regular thickness at the top). Hopefully it will be useful for other people.
This is a simple shelf with a 14mm gap that fits on top some monitors. Wide enough to fit a game controller top. I put an edge along the sides to prevent fall off the back. For some reason I also added a bumper on side of the shelf were the monitor sits. It might be on the thin side, but it is not meant to hold anything heavy.
I used mouse ear brims to help hold it during printing. For my monitor I made two shelfs 180mm long and one 175mm (the green ran out), just make sure it is not uniformed scaling.