1 / 6
Trumpet Cleaning Adapter for Shower Hose and Gardena
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Trumpet Cleaning Adapter, can be used with 1/2" Shower Hose or Gardena
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 160
- Makes
- 0
- Views
- 510
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
This is a trumpet cleaning adapter for use with a ½" threaded shower hose or a Gardena hose.
Add a 11 x 2,5 mm O-Ring to the Gardena adapters.
I also added an adapter shower hose to gardena so that you can use a garden hose to elongate your shower hose in case you need it.
Instructions to clean a trumpet using the adapter:
You’ll Need:
- Garden hose or shower hose (low pressure)
- Mild dish soap
- Large tub/sink
- Valve oil & slide grease
- Cleaning snake & mouthpiece brush
- Soft cloth
- 3D-printed hose adapter
Steps:
Disassemble
- Remove mouthpiece, slides, valve caps, and valves.
- The 3D-printed adapter lets you connect a Gardena or shower hose directly to trumpet tubing for controlled flushing.
Rinse
- Flush body/slides with gentle water (no valves!).
- Avoid direct pressure into valve casings.
Soak
- Soak parts (except valves) in lukewarm water + dish soap for ~20–30 min.
Brush
- Use snake brush for tubing/slides.
- Mouthpiece brush for mouthpiece.
Clean Valves
- Wipe valves with soapy cloth; rinse carefully. Don’t soak or scratch.
Final Rinse
- Rinse all parts again, shake off water, let air dry.
Reassemble
- Oil valves, grease slides, reassemble in order.
Polish
- Wipe exterior with soft cloth; polish if needed.
⚠ Tips & Cautions
- Only use gentle water pressure.
- Avoid hot water to protect lacquer/solder.
- Deep clean every 3–6 months.