1 / 6
Trumpet Cleaning Adapter for Shower Hose and Gardena — zdjęcie 1
1 / 6

Trumpet Cleaning Adapter for Shower Hose and Gardena

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Trumpet Cleaning Adapter, can be used with 1/2" Shower Hose or Gardena

Ocena
0 / 5
Polubienia
18
Pobrania
160
Wydruki
0
Wyświetlenia
510
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

This is a trumpet cleaning adapter for use with a ½" threaded shower hose or a Gardena hose.

Add a 11 x 2,5 mm O-Ring to the Gardena adapters.

I also added an adapter shower hose to gardena so that you can use a garden hose to elongate your shower hose in case you need it.

Instructions to clean a trumpet using the adapter:

You’ll Need:

  • Garden hose or shower hose (low pressure)
  • Mild dish soap
  • Large tub/sink
  • Valve oil & slide grease
  • Cleaning snake & mouthpiece brush
  • Soft cloth
  • 3D-printed hose adapter

Steps:

Disassemble

  • Remove mouthpiece, slides, valve caps, and valves.
  • The 3D-printed adapter lets you connect a Gardena or shower hose directly to trumpet tubing for controlled flushing.

Rinse

  • Flush body/slides with gentle water (no valves!).
  • Avoid direct pressure into valve casings.

Soak

  • Soak parts (except valves) in lukewarm water + dish soap for ~20–30 min.

Brush

  • Use snake brush for tubing/slides.
  • Mouthpiece brush for mouthpiece.

Clean Valves

  • Wipe valves with soapy cloth; rinse carefully. Don’t soak or scratch.

Final Rinse

  • Rinse all parts again, shake off water, let air dry.

Reassemble

  • Oil valves, grease slides, reassemble in order.

Polish

  • Wipe exterior with soft cloth; polish if needed.

⚠ Tips & Cautions

  • Only use gentle water pressure.
  • Avoid hot water to protect lacquer/solder.
  • Deep clean every 3–6 months.

Tagi