Small Watering Nozzle for Low Pressure Systems
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This nozzle fits a standard garden hose thread and waters plants without damaging them if your system has low pressure.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 31
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Watering nozzle fits a standard garden hose. This is a reduced size of my larger one for use on water systems that have limited pressure and flow. I have a larger design on “Printables” for more typical water systems named "Gentle High Flow Watering Nozzle". Spray holes are designed to spread water out. Can be put on a garden hose and also fits many watering wands as a replacement nozzle. Prints without supports and should work in most materials like PLA, PETG, ABS etc. I recommend a 0.4 mm nozzle and 0.20 mm layer height. Be sure to use at least 5 perimeters and 100% rectilinear infill for strength. You will need to add a standard garden hose gasket.