Vertical Stands for Fosi V3 Monoblocks (1 - 7 amplifiers)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1x, 2x, 3x, 4x, 5x, 6x, 7x versions of vertical stands for Fosi V3 Monoblocks (better space utilization, ventilation).
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 74
- Makes
- 1
- Views
- 338
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Fosi v3 Mono can get pretty warm (uncomfortable to touch). The V3s have ventilation ports on the side. These stands will hopefully result in better ventilation. Note though that the ones sitting in the middle of the stack have no cool air next to them. I have used the 4x version for a few movies now with no issues. But your mileage may vary and use at your own risk.
Print in pairs/twice and use a material that can deal with the heat (I used PETG with 3 wall loops, 15% gyroid infill, outer/inner wall order, seam in back and 0.12mm layer height).
This is my first little model that I'm sharing with the world. Hope I did it right!