1 / 1
Voron 2.4 (or any other) 2x120mm controller fans in bottom panel — image 1

Voron 2.4 (or any other) 2x120mm controller fans in bottom panel

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A mount for 2x120mm bottom fans

Rating
0 / 5
Likes
10
Downloads
20
Makes
0
Views
185
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Title says it all! Be careful with vertical clearance on the inside. I used double sided tape to mount the fans at first to the panel to check I can close it with the fans in the desired position.
 

Put painters tape on the panel and then use the mount to sketch the outlines onto the painters tape. Use a jig saw to cut out the holes (with some extra room around it, be careful to not get to close to the holes.

I melted heatset inserts into the fan and used M3x8, you can also use longer M3 screws and nuts. The screw head holes are sized for M3 SHCS.

I install this mod here: 

Tags