Moon Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Moon Lithophane Lamp for desks, nightstands, shelfs, etc.
- Rating
- 4.957 / 5
- Likes
- 2,246
- Downloads
- 11,992
- Makes
- 133
- Views
- 58,833
- Reviews
- 92
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
hanging Moon Lamp variant
Moon Globe
3 sizes available: Ø 140mm / Ø 175mm / Ø 200mm (Ø200mm version is not printable on the MINI)
Hole for light bulb, diameter: 60 mm
Print instructions
Infill: 100 % (The 3D model is a hollow object, infill 100% means print a solid shell)
Layer: 0,2 mm
Supports: No
Base
for E27 Light bulbs
Print instructions
Infill: 5% - 10%
Layer: 0,2 mm
Supports: No
The print must be paused twice to insert the M3 Nuts (check Photos). First pause after 5mm, second pause after 7,6mm.
The pause is already setup in the 3mf and gcode files.
Strain Relief
Print instructions
Infill: 20% Honey Comb
Layer: 0,15 mm
Supports: No
Additional required parts:
4x M3 Nut
4x M3x12 Screw
1x E27 Ceramic Socket Bulb Holder, something like this
1x Power Cord, something like this or that
The picture is taken with a warm white light bulb, for a picture with a cold white light bulb please check the hanging Moon Lamp variant
Credit for the Moon Lithophane goes to u/moononournation:
https://www.thingiverse.com/thing:4102658/files
Progressive Detail Moon Lamp : 23 Steps (with Pictures) - Instructables