1 / 2
Ender 3 linear rail Direct drive bracket mount (UNTESTED)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket that mounts your extruder above the hotend.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Print it as shown in the layout. It mounts on the little stubs that hold the hotend, on the x carraige, so you'll have to remove that. Print it in PETG, at high infill e.t.c (Just follow Kevins 5 rule, 50% infill, 5 walls, 5 top & lower walls). the side with the shortest overhang faces away from the front. You might need longer screws though, so I suggest drill out a bit of the hole in the extruder piece to make the bolts go in deeper (Thats what I've done. Havn't printed it yet though)