Manfrotto MHXPRO-2W pan brake knob - Replacement part
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
To replace the pan brake from a Manfrotto tripod head.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
When the pan brake knob is not thighten, the part applying pressure to block the rotation can detachs.
I lost mine, it was no longer possible to block the rotation.
I eyeballed a replacement part, printed it and jammed it inside the hole.
After some trials and errors, it works.
You need a strong layer adhesion because the screw applying pressure can crush the part.
It can be difficult to extract the piece when it's inserted.
I found out you can get the original spare part from a full knob set : Manfrotto R104516
Top layers : 0
Bottom layers : 0
Infill : 0%
Perimeters : 1.8mm shell (idea is to avoid any gap in the center section)
No support needed.
