Samsung Galaxy S10e Phone Case TPU
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Phone case designed for Samsung Galaxy S10e. Printed in TPU.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 74
- Makes
- 0
- Views
- 182
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This is a phone case for the Samsung Galaxy S10e. I wanted to fix a few issues others i found had. The fingerprint sensor works, but the buttons are a kinda firm. Not too bad though. I haven't tested the fit of the audio jack but the charger cutout works with my charger. Its a tight fit and i made it thick to provide extra protection. I have used it for several weeks, and dropped it several times, and it did its job. If i had to advertse it i would call it "durable" since its way thicker than some out there.
Settings:
Material: TPU 95a
Layer Height: Doesn't matter
Nozzle Size: Doesn't matter (i set it to .6 mm in the slicer but forgot to switch it from .4 mm on the printer for 2 of the tests)
Supports: Yes. Despite the fact that TPU makes for annoying supports, you will want to enable tree supports and set to build plate only. Also, you may need to paint them on the power button cutout and volume and Bixby button.
Infill: Probably doesn't matter but i used Gyroid and Grid at 30%. Both work. If you do it too low you will have sagging top surface especially with grid or similar. This just looks weird, i don't think it causes any issue.
UPDATE: This phone gave out on me so i will no longer be updating this design (unless some huge flaw arises). Hopefully it works for you. Also please like because it gives me free filament. And post a make to get free filament for yourself.
I've never used onshape links before, so if it doesnt work let me know and ill do my best to fix it asap.