Inertial Plane for Car, Beechcraft Bonanza
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add to your dash and the plane points where your car does!
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 45
- Makes
- 0
- Views
- 215
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Modeled to loosely resemble the v-tail Bonanza. No supports needed when printing as they are modeled right into the .3mf. The large block at the back of the print forces the printer to waste time printing that, allowing the walls of the tail to cool so they don't end up sagging. This was the best solution I found to help that large overhang.
Also included is a little stand in case you just want a little plane on a little stand.
I think the bearings I used were these:
https://www.amazon.com/dp/B0CH2X65Y6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1
Fair warning, cars get really hot when left in the sun, like hot enough to soften ABS.