Inertial Plane for Car, Beechcraft Bonanza
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Add to your dash and the plane points where your car does!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Modeled to loosely resemble the v-tail Bonanza. No supports needed when printing as they are modeled right into the .3mf. The large block at the back of the print forces the printer to waste time printing that, allowing the walls of the tail to cool so they don't end up sagging. This was the best solution I found to help that large overhang.
Also included is a little stand in case you just want a little plane on a little stand.
I think the bearings I used were these:
https://www.amazon.com/dp/B0CH2X65Y6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_4&th=1
Fair warning, cars get really hot when left in the sun, like hot enough to soften ABS.