1 / 3
BST-863 Hot Air Station Tip Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This little holding jig makes changing tips handsfree easy it magnetically attaches to the slot in the Hand Pieces Dock
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Printing Instructions
Filament
| Material Advised | PETG/PET/ASA |
Material Propaties Required
| Property | Type |
|---|---|
| Constancy | Hard |
| Durablity | Not brittle |
| Sun Bleaching Protection | depends on use case but would advise for long term use not using PLA |
Slicing
| Property | Information |
|---|---|
| Print Direction | on base |
| Infill | 5% |
| Supports | Required |
| Nozzle Size | 0.4 (0.6 should be fine too) |
| Pause for Magnets | Add a pause at the layer before the magnets holes get closed |
Overview
This provides a solution for easy nozzle tip changing it fits all 3 tips provided in each hole allowing for easy switching there is still plenty of room to use the tip remover
Assembly Instructions
- Drop in magnets when print pauses

Instalation Instructions
- insert in to hole in the Hand Pieces Dock
