1 / 3
BST-863 Hot Air Station Tip Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This little holding jig makes changing tips handsfree easy it magnetically attaches to the slot in the Hand Pieces Dock
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Printing Instructions
Filament
| Material Advised | PETG/PET/ASA |
Material Propaties Required
| Property | Type |
|---|---|
| Constancy | Hard |
| Durablity | Not brittle |
| Sun Bleaching Protection | depends on use case but would advise for long term use not using PLA |
Slicing
| Property | Information |
|---|---|
| Print Direction | on base |
| Infill | 5% |
| Supports | Required |
| Nozzle Size | 0.4 (0.6 should be fine too) |
| Pause for Magnets | Add a pause at the layer before the magnets holes get closed |
Overview
This provides a solution for easy nozzle tip changing it fits all 3 tips provided in each hole allowing for easy switching there is still plenty of room to use the tip remover
Assembly Instructions
- Drop in magnets when print pauses

Instalation Instructions
- insert in to hole in the Hand Pieces Dock
