1 / 6
HMSTR.1 - Toy Dart Blaster compatbile with X-Shot Skins Flux Internals
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The HMSTR.1 (short for Hamster 1) is a Reshell for the X-Shot Skins Flux Toy Dart Blaster.
- Rating
- 5 / 5
- Likes
- 12
- Makes
- 1
- Views
- 321
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Standard Digital File License
Let me know if you need other variants.
UPDATE 250722: added a replacment Pull Rod
Included Files:
- Body Left Side
- Body Right Side (Versions for Heat Inserts or Plastic Screws)
- Trigger
- Trigger Pin
- Catch Release
- HalfDart 3x Inline Clip Barrel (Versions for Heat Inserts or Plastic Screws)
- HalfDart 3x Inline Clip Barrel with Pica Rail (Versions for Heat Inserts or Plastic Screws)
- Mega Dart Barrel with Pica Rail (Versions for Heat Inserts or Plastic Screws)
- HalfDart Barrel with Pica Rail (Versions for Heat Inserts or Plastic Screws)
- Blade Attachment (Please print in Flex Material like TPU)
- Pica Pins for Blade Attachment
additional Hardware needed:
- Internals and Screws of a X-Shots Skins Flux
- In Case you want to use Heat Inserts and M3 Screws instead of the plastic Screws: 3xM3x6mm Heat Insert + 3xM3x8mm Screw
- Please add hot glue, E-Tape or a fitting O-Ring when assembling PlungerTube to barrel to ensure a good air seal

Since both shell parts are meant to be printed on the side surface, please ensure that you have your first layer parameters dialed in.
Please get in touch if you think the files need any adjustments.
Anmerkung zu Umsatzsteuer:
Umsatzsteuer wird aufgrund Kleinunternehmerstatus gem. § 19 UStG nicht explizit ausgewiesen.