1 / 6
HMSTR.1 - Toy Dart Blaster compatbile with X-Shot Skins Flux Internals — zdjęcie 1
1 / 6

HMSTR.1 - Toy Dart Blaster compatbile with X-Shot Skins Flux Internals

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The HMSTR.1 (short for Hamster 1) is a Reshell for the X-Shot Skins Flux Toy Dart Blaster.

Ocena
5 / 5
Polubienia
12
Wydruki
1
Wyświetlenia
326
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Standard Digital File License

Let me know if you need other variants.

UPDATE 250722: added a replacment Pull Rod

Included Files:

  • Body Left Side
  • Body Right Side (Versions for Heat Inserts or Plastic Screws)
  • Trigger
  • Trigger Pin
  • Catch Release
  • HalfDart 3x Inline Clip Barrel (Versions for Heat Inserts or Plastic Screws)
  • HalfDart 3x Inline Clip Barrel with Pica Rail (Versions for Heat Inserts or Plastic Screws)
  • Mega Dart Barrel with Pica Rail (Versions for Heat Inserts or Plastic Screws)
  • HalfDart Barrel with Pica Rail (Versions for Heat Inserts or Plastic Screws)
  • Blade Attachment (Please print in Flex Material like TPU)
  • Pica Pins for Blade Attachment

additional Hardware needed:

  • Internals and Screws of a X-Shots Skins Flux
  • In Case you want to use Heat Inserts and M3 Screws instead of the plastic Screws: 3xM3x6mm Heat Insert + 3xM3x8mm Screw
  • Please add hot glue, E-Tape or a fitting O-Ring when assembling PlungerTube to barrel to ensure a good air seal

 

Since both shell parts are meant to be printed on the side surface, please ensure that you have your first layer parameters dialed in.

Please get in touch if you think the files need any adjustments.

 

Anmerkung zu Umsatzsteuer:
Umsatzsteuer wird aufgrund Kleinunternehmerstatus gem. § 19 UStG nicht explizit ausgewiesen.

Tagi