Padded Bicycle Handle Bar Grip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Grip for a 7/8" bicycle handle bar that offers extra padding/vibration dampening via low infill and TPU filament
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 146
- Makes
- 2
- Views
- 508
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
My local bike trails are pretty rough, so I decided to print myself some custom handle bar grips out of TPU that offer some extra padding.
The grips fit a standard 7/8" handle bar, and are sized such that 10% gyroid infill will form a complete pattern and give sufficient support.
Hardware needed to tighten grips onto handle bars:
- 2 M4 x 20mm bolts
- 2 M4 nuts
Since the print parameters are important to the amount of padding, I've included two print files which work well on my MK3s+ with GiantArm TPU:
- 2 perimeter walls will give a firmer grip
- 1 perimeter wall will give a more padded grip
Both work, but I've found that 1 perimeter is the most comfortable for me.