Radeon Instinct MI8 DisplayPort PCIe bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket to replace the original which blocks DisplayPort socket.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 113
- Makes
- 0
- Views
- 1,415
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Hi everyone.
It's my first upload here so any suggestions for improvements are welcome.
There was this special deal for a Professional-grade Radeon Instinct MI8 (basically a R9 Nano without a fan and with only 1 monitor-out: DisplayPort) for around a €100 and I just could not let it slip by.
The problem is, that the GPU's stock bracket is obstructing the single DisplayPort socket.
I took the XFX RX 550 standard height bracket (by wmlowder) model so I didn't have to start with an empty canvas and went away at modeling. I couldn't find it here on PrusaPrinters and gave up after a few minutes.
The ventilation cutouts are copied by taking a picture of the original bracket, then doing some cleanup and converting it to svg.
Since I'm using Tinkercad (I don't feel comfortable enough with constraint-based modeling) it took a few test prints to get the holes just right.
You can see a few prints with greater thickness - I made those to increase stiffness, but they didn't fit in the PC Case.
I've printed my working piece in Fiberlogy EasyPETG Black.
The file I printed is the MI8_PCIe_Bracket Thin side-mount - it's supported my GPU for a few days now and seems fine.
I also provide a file with thicker side-mount but I haven't actually printed it.
0.4 nozzle
Sliced in Cura at 0.6 outer and inner line width
Support interface line width: 0.26
Other lines at 0.4
I reduce speeds with these settings.
Please take a look at the screenshots if you need to see them.