Witcher anfas - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Witcher anfas - 170x170 mm HueForge Without frame Licensed image
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x170mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3mm
Filaments Used:
PLA+ HIGH SPEED Jamg He Black Transmission Distance: 0.3
PLA 3DPower Brown Transmission Distance: 0.2
PLA BambuLab Cocoa Brown Transmission Distance: 0.3
PLA HIGH SPEED 3DPower Flame Red Transmission Distance: 3.3
PLA HIGH SPEED 3DPower Papaya Orange Transmission Distance: 5.7
PLA HIGH SPEED 3DPower Amber Yellow Transmission Distance: 6.2
PLA+ HIGH SPEED Jamg He White Transmission Distance: 6.9
This print uses 7 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Brown
At layer #8 (0.72mm) swap to Cocoa Brown
At layer #10 (0.88mm) swap to Flame Red
At layer #12 (1.04mm) swap to Papaya Orange
At layer #20 (1.68mm) swap to Amber Yellow
At layer #28 (2.32mm) swap to White for the rest.