1 / 1
Flash adapter with pogo test pins for WLED ESP32 Controller — image 1

Flash adapter with pogo test pins for WLED ESP32 Controller

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Flash adapter with pogo test pins for WLED ESP32 Controller

Rating
0 / 5
Likes
22
Downloads
82
Makes
0
Views
2,380
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Flash adapter with pogo test pins for up to 6 pins.



This model is mainly used for the WLED ESP32 Controller:

https://github.com/Hasenpups/WLED_ESP32_Controller

 

The following parts are required:

3D prints
1 x M3x30 screw
2 x M3x 10 screw
1 x 8mm spring 20mm long
1 x jumper wire (1x4 Pins)
4 x 1mm Pogo Pins

The M3 threads are modeled in the design and will be printed, there is no need to cut the threads.

Attention, there is also a thread in all 3 blocks of the base. This way there is no nut required.

The pogo pins need to be gently pressed into the holes of the female jumper wires.