Temu vice clamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Found this little neat vice on Temu and needed to fit it on to my table edge to stop the damn thing sliding around.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
BOM : 4 x M5 heatset inserts and 4 x M5x20 hex bolt , I also use 2 x M6x25 hex bolt inside the red bolts (threaded and glued in for max strenght) but it will work just fine without.
Clamp part: I used PETG-CF with 8 walls, top and bottom and 25% gyroid infill - 0,6 nozzle with 1.8mm layer hight.
Bolt part: I used PETG with 8 walls, top and bottom and 25% gyroid infill - 0,4 nozzle with 1.6mm layer hight.
Also note before printing: My table edge is 28mm has a radius 6 curve and I made it for my table ..feel free to do your own thing to this model.
Enjoy