Roland UM-One MIDI-to-USB Controller mount for 1.5" Drum Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protect your MIDI controller from careless feet, or just make your setup a little cleaner
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
My Alesis eDrums are predominantly used for Clone Hero, and the kids like to have a jam every now and then. Unfortunately they also like to run around and I was worried about them tripping on my dangling wires and breaking something/themselves.
Can be printed without supports depending on how well your printer does bridging. There is a small amount of 90 degree overhangs on the top edge of where the UM-one sits. I printed mine from ASA perfectly fine with no supports.
This clamp should slide onto most 1.5” drum racks, and then clamp down firm using any M6 screw of >20mm you have on hand. The Roland UM-one is a snap fit. The design is asymmetrical and matches the UM-one’s shape, so please pay attention to the “Up” arrow embossed on the inside of the mount and orient the UM-one in that orientation.
I designed this clamp around some M6 prevailing torque nuts I had on hand and they were a press fit. If you have any issues I’ve also included the .step and .f3d files for you to make any modifications.