Haken für Hängeschrank/ Hook for wall cabinet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Zum Kleben unter einen Hängeschrank/ For gluing under a wall cabinet
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wir haben diesen Haken mit Tesa® Powerstrips Large (2 kg) unter einen Hängeschrank geklebt. Wir nutzen ihn, um einen Spritzschutz für Pfannen aufzuhängen.
Es ist kein Support beim Druck notwendig, die beiden Teile werden einfach zusammengesteckt. Die Lasche des Powerstrips ist nicht verdeckt, da man nur sehr selten unter den Schrank schaut. Bitte die Flächen am Haken und Schrank entfetten, zum Beispiel mit Aceton, und die Klebeanleitung beachten.
Die wichtigsten Abmessungen sind in der Zeichnung zu sehen.
Translation: DeepL
We stuck this hook under a wall cupboard using Tesa® Powerstrips Large (2 kg). We use it to hang up a splash guard for pans.
No support is needed when printing, the two parts are simply stuck together. The tab of the power strip is not covered, as you rarely look under the cupboard. Please degrease the surfaces on the hook and cupboard, for example with acetone, and follow the gluing instructions.
The most important dimensions are shown in the drawing.