another MacroKey (this time whitout OLED)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
printed at 0.2 with a 0.4 noozle
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 33
- Makes
- 0
- Views
- 443
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Printing:
At the base of the keyboard there are some small projections that will block the insertion of the plate, but it is so that it does not move from its place.
The print has been done with a 0.4mm nozzle, 0.2 layer height and 20% infill.
No supports or rafts.
Programing:
This keyboard is programmed in circuitpython 7.1. The code as well as the necessary libraries can be found on GITHUB (https://github.com/manelto/tecladoQTPySinOLED)
The keyboard is programmed to make it easy to use the VBA language, but it can be easily changed to perform any other function. (see the last image)
By changing the values on lines 31-38, you can change the color of the flash when you press the keys.
By changing lines 57 and 59, you can define which keystrokes are executed when each key is pressed. Notice the comments on line 48