HULA low profile for Centauri Series
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This Hula Version is build for Hula Voron Feet, meaning the most basic Hula Feet you can get.
Get your Hula printable files an manual here: https://github.com/thrutheframe/HULA_Voron
You are required to print the “HULA TPU parts STL” and “HULA rigid parts STL”
This mod will replace one Part from each folder - specifically shown in the 2nd image here on printables.
motivation
Contrary to other Centauri Carbon Hula mods out there this one is ment to be as low profile as possible while allowing to just slip over the stock feet so the printer is still easily moveable even if the hula feet are currently not around.
Print/Assembly
- requires 4x Hula Voron Feet (see link above) minus the ones from here
- requires 4x printed parts each from this printable
- Print TPU named Part in TPU
- is slipped over the stock rubber feet of the Centauri
- Petal Part is optional - geometry is optimised for slicing with less retracts
ECC Model by https://www.printables.com/model/1355933-elegoo-centauri-carbon-cad-model-wip
Version history
v02 initial release